艾门(AMMEN)化学油墨东莞经营部
主营产品:AMMIN特种油墨,AMMEN表面处理原料,AMMEN化学添加剂,AMMON润滑油,AMMIN硬化
免费会员
  •  
  • 联系方式
与我联系时,请说明:
是在“化工机械网”看到的
  • 联系人:陈俊安
  • 电 话:0769-87777770
  • 手 机:13923737684
  • 传 真:-
  • 地 址:凤岗镇小布工业区


以下是百度推荐信息
  • 产品展示
产品名称: PLATIVE ISP3320金属氧化玻璃蚀刻保护漆
产品编号: PLATIVE ISP3320
产品商标: AMMEN(艾门)
产品规格: 5kg, 10kg, 20kg
参考价格: 面议
更新日期: 2009/4/13 16:30:52
被阅次数: 571次
 
  • 详细说明

PLATIVE ISP3320 Anodizing Protective Paint

(多次强氧化保护油墨、玻璃深度蚀刻保护油墨)

Ⅰ、Brief Description

产品简述

PLATIVE ISP3320, a kind of antioxidant insulating paint, is specialized applied to anodizing treatment. Strong acid resistance(Such as Hydrofluoric acid, Concentrated sulfuric acid). Good adhesion. Good Leveling

PLATIVE ISP3320是一种抗氧化绝缘保护漆,专门开发应用于阳极氧化处理过程的保护作用,耐强酸(如氢氟酸、浓硫酸等),附着力好,流平性好

Operational Guidance

操作向导

         First, to clean and dry the surface, no oil slicks, no dust. Second, to paint the surface where prevent from plating or pickling next (The corresponding additives can be used to dilute the product); painting by screen printing, pad printing, scratch, dipping, or spraying. Then 160-200OC heat cured in 20-30 minutes. To clean the coating with the corresponding removers after anodizing.

先清洁并干燥工件表面,确定无油污、无灰尘;再将阻镀漆涂于需保护位置(可用相应稀释至需要稠度) ;可丝印、移印、刮涂、浸涂、喷涂等;然后160至200摄氏度烘干,即可进行氧化加工;氧化处理后,请用相应清洁剂除去涂层。

Annotation

附注

Considering the painting method, please dilute the product to appropriate viscosity before use; please use the corresponding thinners, or else it could lead to paint deterioration; during operation, please keep the environment ventilation to prevent inhalation.

产品使用前,根据施工方法,调至适当粘度;请采用相应稀释剂,否则可能导致油墨变质;施工时,请保持环境通风,防止吸入。

免责声明:以上信息由企业自行提供,该企业负责信息内容的真实性、准确性和合法性。化工机械网对此不承担任何保证责任。
  • 艾门(AMMEN)化学油墨东莞经营部 版权所有
  • 电话:0769-87777770  传真:-
  • 地址:凤岗镇小布工业区  邮编: