PLATIVE VAP2010S (VAP2010W) Protective Paint

(真空电镀保护油墨)

Ⅰ、Brief Description

产品简述

PLATIVE VAP2010S (VAP2010W) Protective Paint is specialized applied to vacuum plating, 300 ℃ high temperature capability, corrosion resistance, good adhesion, and fast-drying, peeling easy.

PLATIVE VAP2010S (VAP2010W) 专门开发应用于真空电保护漆，能耐300℃高温，耐侵蚀，附着力好，快干，方便剥离。

Ⅱ、Operational Guidance

操作向导

         First, to clean and dry the surface, no oil slicks, no dust. Second, to paint the surface where prevent from plating or pickling next (The corresponding additives can be used to dilute the product, SR6 for VAP2010S, SW6 for VAP2010W); painting by screen printing, pad printing, scratch, dipping, or spraying. Then air dry in 30 minutes, or forced dry at 80^OC in 10 minutes. After plating, to clean the coating with the corresponding removers, or manual peel off.

先清洁并干燥工件表面，确定无油污、无灰尘；再将阻镀漆涂于需保护位置（可用相应稀释至需要稠度，SR6对VAP2010S，SW6对VAP2010W） ；可丝印、移印、刮涂、浸涂、喷涂等；然后自然干30分钟左右，80摄氏度烘干10分钟，真空电镀后，请用相应清洁剂除去涂层，或者手工剥离。

Ⅲ、Annotation

附注

Considering the painting method, please dilute the product to appropriate viscosity before use; please use the corresponding thinners, or else it could lead to paint deterioration; during operation, please keep the environment ventilation to prevent inhalation.

产品使用前，根据施工方法，调至适当粘度；请采用相应稀释剂，否则可能导致油墨变质；施工时，请保持环境通风，防止吸入。