艾门(AMMEN)化学油墨东莞经营部
主营产品:AMMIN特种油墨,AMMEN表面处理原料,AMMEN化学添加剂,AMMON润滑油,AMMIN硬化
免费会员
  •  
  • 联系方式
与我联系时,请说明:
是在“化工机械网”看到的
  • 联系人:陈俊安
  • 电 话:0769-87777770
  • 手 机:13923737684
  • 传 真:-
  • 地 址:凤岗镇小布工业区


以下是百度推荐信息
  • 友情链接
  • 产品展示
产品名称: AMMEN(艾门)表面处理原料
产品编号: PLATIVE
产品商标: AMMEN(艾门)
产品规格: 5kg, 10kg, 20kg
参考价格: 面议
更新日期: 2009/4/13 16:03:44
被阅次数: 394次
 
  • 详细说明

PART : AMMEN Surface Treatment Materials (Brief Introduction)

Category

类型

Trade Name

商品名

Brief Description

产品简述

Operational Guidance

操作向导

Annotation

附注

Protective Paint for Vacuum Plating

真空电镀阻镀漆

AMMEN PLATIVE VAP2010 Protective Paint

PLATIVE VAP2010 protect paint is specialized applied to vacuum plating, 300 ℃ high temperature capability, acid or alkali resistance, corrosion resistance, good adhesion, and fast-drying, peeling easy.

PATIVE VAP2010 专门开发应用于真空电保护漆,能耐300℃高温,耐酸碱,耐侵蚀,附着力好,快干,方便剥离。

First, to clean and dry the surface, no oil slicks, no dust. Second, to paint the surface where prevent from plating next (ALATIVE T2010 can be used to dilute the product). Then, forced dry at 100 ℃ before plating. After plating, the coating can be manual stripping, or cleaning with ALATIVE C2010.

先清洁并干燥工件表面,确定无油污、无灰尘;再将PLATIVE VAP2010涂于需保护位置(可用ALATIVE T2010稀释至需要稠度) ;然后100℃烘干,即可进行电镀;镀后,PLATIVE VAP2010涂层可手工剥离,或者ALATIVE C2010清洗。

Before use, low-speed mixing uniform of PLATIVE VAP2010 is required; dilute the product with special additives ALATIVE T2010,or else it could lead to paint deterioration; the film with a certain thickness, is in order to peeling easy after plating.

VAP2010使用前,需低速搅拌均匀;稀释时请使用专用添加剂T2010,否则可能导致油漆变质;涂膜需有一定厚度,方便镀后剥离。

Protective Paint for Ion Plating

离子电镀的阻镀漆

Insulated Paint for General Plating

常规绝缘阻镀漆

AMMEN PLATIVE ISP3020 Insulated Paint

PLATIVE ISP3020,a kind of insulated paint, is specialized applied to general plating treatment, such as nickel plating, copper plating, chrome plating, tin plating, etc. Acid resistance. Alkali resistance. Good adhesion. Good Leveling.

PLATIVE ISP3020是一种绝缘保护漆,专门开发应用于电镀一般金属过程的阻镀保护作用,如镀镍、镀铜、镀铬、镀锡等;耐酸碱,附着力好,流平性好

First, to clean and dry the surface, no oil slicks, no dust. Second, to paint the surface where prevent from plating next (The corresponding additives can be used to dilute the product); painting by screen printing, pad printing, scratch, dipping, or spraying. Then drying . After Plating, cleaning the coating with the corresponding removers.

先清洁并干燥工件表面,确定无油污、无灰尘;再将阻镀漆涂于需保护位置(可用相应稀释至需要稠度) ;可丝印、移印、刮涂、浸涂、喷涂等;然后烘干,即可进行电镀;电镀后,请用相应清洁剂除去涂层。

Considering the painting method, please dilute the product to appropriate viscosity before use; please use the corresponding thinners, or else it could lead to paint deterioration; during operation, please keep the environment ventilation to prevent inhalation.

产品使用前,根据施工方法,调至适当粘度;请采用相应稀释剂,否则可能导致油漆变质;施工时,请保持环境通风,防止吸入。

Insulated Paint for Special Plating

特殊绝缘阻镀漆

AMMEN PLATIVE ISP3028 Insulated Paint

PLATIVE ISP3028, a kind of insultated paint, is specialized applied to special plating treatment, such as gold plating, silver plating, etc. Strong acid resistance. Strong alkali resistance. Good stability. Good adhesion. Good leveling. Effective protection. Easy to clean

PLATIVE ISP3028是一种绝缘保护漆,专门开发应用于电镀贵金属过程的阻镀保护作用,如镀金,镀银等;耐强酸,酸强碱,稳定性良好,附着力好,流平性良好,阻镀效果良好,易于清洗

Insulated Paint for Anodizing

阳极氧化阻镀漆

AMMEN PLATIVE ISP3320

Insulated Paint

PLATIVE ISP3320, a kind of antioxidant insulating paint, is specialized applied to anodizing treatment. Acid resistance. Alkali resistance. Good adhesion. Good Leveling

PLATIVE ISP3320是一种抗氧化绝缘保护漆,专门开发应用于阳极氧化处理过程的保护作用,耐酸碱,附着力好,流平性好

Conductive Paint

导电漆

AMMEN PLATIVE ELP3028 Conductive Paint

PLATIVE ELP3028, a kind of conductive paint, is specialized applied to the Conducting electroforming of metals, non-metallic, wax, resin and so on; low resistance, conducting effective and the electroforming effect will be very reality.

PLATIVE ELP3028 是一种导电漆,专门开发应用于金属、非金属、蜡、树酯等的表面导电电铸,电阻低,导电效果好,电铸效果异常理想逼真。

First, to clean and dry the surface, no oil slicks, no dust. Second, to paint the surface where need to be electroforming (ALATIVE T3028 can be used to dilute the product); painting by scratch, or spraying.

先清洁并干燥工件表面,确定无油污、无灰尘;再将PLATIVE ELP3028涂于需导电电铸位置(可用ALATIVE T3028稀释至需要稠度) ;可刮涂、喷涂。

Considering the painting method, please dilute the product to appropriate viscosity before use; please use the corresponding thinner ALATIVE T3028, or else it could lead to paint deterioration; during operation, please keep the environment ventilation to prevent inhalation.

ELP3028使用前,根据施工方法,调至适当粘度;请采用相应稀释剂T3028,否则可能导致油漆变质;施工时,请保持环境通风,防止吸入。

免责声明:以上信息由企业自行提供,该企业负责信息内容的真实性、准确性和合法性。化工机械网对此不承担任何保证责任。
  • 艾门(AMMEN)化学油墨东莞经营部 版权所有
  • 电话:0769-87777770  传真:-
  • 地址:凤岗镇小布工业区  邮编: