艾门(AMMEN)化学油墨东莞经营部
主营产品:AMMIN特种油墨,AMMEN表面处理原料,AMMEN化学添加剂,AMMON润滑油,AMMIN硬化
免费会员
  •  
  • 联系方式
与我联系时,请说明:
是在“化工机械网”看到的
  • 联系人:陈俊安
  • 电 话:0769-87777770
  • 手 机:13923737684
  • 传 真:-
  • 地 址:凤岗镇小布工业区


以下是百度推荐信息
  • 友情链接
  • 产品展示
产品名称: ALATHER(ALARATE) BN系列橡胶油墨
产品编号: ALATHER/ALARATE BN
产品商标: AMMIN(艾门)
产品规格: 5kg, 10kg, 20kg
参考价格: 面议
更新日期: 2009/4/13 16:17:21
被阅次数: 308次
 
  • 详细说明

ALARATE (ALATHER) BN Series Inks

(特种橡胶专用油墨)

Description (产品描述)

         ALARATE (ALATHER) BN series inks, which prepared with the excellent hydrophobic resin, high quality pigments and fillers, and so on, are of excellent adhesion and good covering powder. The film is of excellent flexibility and is anti-tensile, washable, foldable, etc.

         ALARATE (ALATHER) BN系列油墨由疏水性*的树脂、优质的颜填料配制而成。该产品附着力极佳,遮盖力高;涂膜柔软性非常好,抗拉伸能力强,耐水洗,可折叠。

Recommended Application (推荐应用)

◆ Recommended substrate: PA(Polyamide Fiber), PU, PET, PVC, Touch Rubber, etc.

◆ Recommended for: Leather, waterproof nylon, canvas, Oxford cloth, ribbon, mark, stickers, cards, Plastic articles with touch rubber coating, etc.

◇ 适用基材:PA(Polyamide Fiber)、PU、PET、PVC、手感橡胶等

◇ 推荐用途:皮革、防水尼龙、帆布、牛津布、织带、唛头、不干胶、卡片、喷涂手感橡胶的塑料制品等

Proposed Operation (操作建议)

         Prepare: To clean the surface with ALATIVE SC7 treater and make sure non-dust, non-impurity. To dilute the ink with 3-20% ALATIVE SR6 thinner and then is ready(In order to regulate the drying rate of ink ,please make use of ALATIVE RR6 dry retarder or ALATIVE SF3 dry accelerant). In order to improve the adhesion and hardness of the film effectively, please add 10-15% (to total) ALATIVE SA5 activator.

         Mesh count: 70T to 180T

         Drying: Air dry in 15 to 30 minutes , or forced dry at 60 OC in about 10 minutes (without activator).

                      Air dry in 12-15 hours, or forced dry at 80 OC in about 30 minutes (activator added).

         Cleaning: To remove the stain and bad print with ALATIVE SC6 remover, and to clear the screen plate with ALATIVE CC6 cleaner.

         印前:用ALATIVE SC7清洗印件表面,确定无尘、杂质;用3-20%的ALATIVE SR6将产品稀释至需要稠度,即可印刷(调节油墨干燥速度,可以配合适量的ALATIVE RR6或ALATIVE SF3)。添加10-15%的ALATIVE SA5活剂化剂,可以有效提高涂膜附着力和硬度。

         网纱:70T至180T

         干燥:自然风干15至30分钟,或60OC烘干,约10分钟(不添加活化剂)。

自然风干12-15小时;或者70OC烘干,约45分钟(添加活化剂)。

         清洗:用ALATIVE SC6清除污点和不良印刷;用ALATIVE CC6清洗网板。

Color & Packaging (颜色&包装)

         Color: More than 20 kinds of colors for selection and with professional mixed-color service.

         Packaging: 1kg/can, 5kg/barrel, 20kg/barrel

颜色:二十多种颜色供选择,并专业调色

         包装:1千克/罐;5千克/桶;20千克/桶

Annotation (附注)

免责声明:以上信息由企业自行提供,该企业负责信息内容的真实性、准确性和合法性。化工机械网对此不承担任何保证责任。
  • 艾门(AMMEN)化学油墨东莞经营部 版权所有
  • 电话:0769-87777770  传真:-
  • 地址:凤岗镇小布工业区  邮编: